Max Aggressive seam setter is designed for leveling and joining the 2 pieces of slabs, which is ideal for kitchen countertop fabrication or relevant granite, marble and engineered stone job. This manual seam setters performing to make leveled surfaces with smooth joints.
Seaming two surfaces is important to treat as an art to make the seams nearly invisible, so Max Aggressive Tool offers such seam setters to assist you in getting the job done right, fast and elegantly. This seam setter produces clean, chip free and straight edges perfectly. The surfaces will mate together perfectly. When done properly the seam will not only feel perfect, it will be as if no seam exists at all. Dual hand cup with ratchet for pilling and aligning of work-pieces in assembly work, Hand cups can be used by easily removing the connecting ratchet assembly easily changes in seconds.
How to use 6” Seam Setter
1: Place the fixed (left) suction cup on the left slab. Place the movable (right) suction cup on the right slab.
2: Pump the plunger until the suction cup attaches completely.
3: To join the seam, turn the side knob counter clockwise until you are satisfied with a seamless appearance.
4: To level the slabs, make sure one of the blue head under the top knob is on the higher side of the seam and turn the top knob clockwise until the slabs are leveled. Usually you only need to use one top knob to level. Use two when there are any expanding needs.
5: Lift the rubber tab on the edge of the suction cup to release the suction after seam has been completed.